Custom Iron-On DTF Transfers
$16.95
Create custom T-shirts at home with your own logos, photos or artwork. Our professionally printed iron-on DTF transfers bring your designs to life in vibrant, full colour—ready to apply to suitable cotton garments with a household iron, with no heat press needed.
Choose from four sheet sizes and upload your design online. Printed in Brisbane and shipped Australia-wide.
Household-iron settings: approx. 135–145°C, steam off, firm even pressure on a firm flat surface, ~10 seconds per section under baking paper, cool 30–60 seconds before peeling, then a 10–15 second finishing press.
Using a Cricut EasyPress? Add a note at checkout and we’ll include the EasyPress instructions with your order.
Read our iron-on DTF transfer guide for application tips and advice.
Transfer only; garment not included.
Choose Same/Next Day in the builder. A surcharge applies: $25.90 per square metre, minimum $19. Order before 12:00 midday Brisbane time, Monday to Friday, and it is made the same day. Order after midday and it is made the next business day.
Volume Discounts
- 6+ m² 5% off
- 12+ m² 10% off
- 30+ m² 15% off
- 60+ m² 20% off
Discount applies automatically at checkout based on total sheet area (m²) ordered
How it works
- Choose your sheet size and upload your artwork
- Place it on the sheet exactly where you want it
- Add to cart and checkout — we print & ship!
You can change this in the editor.
Upload your artwork and place it on the sheet exactly where you want it.
Technical details
About Our Iron-On DTF (cool peel)
Iron-On DTF (cool peel) is a cut sheet for cotton. Press it with a household iron. We strongly recommend against polyester with a household iron. Polyester needs a heat press and Hot Insta Peel film. This is a cut sheet, not a 28 cm or 58 cm gang sheet.
This listing is sold in 200 × 390 mm, 260 × 390 mm, 280 × 390 mm and 300 × 390 mm. Pricing is set per sheet and customers can design online before checkout.
Artwork and Ordering Checklist
- Upload transparent PNG, high-resolution artwork, or other supported files at 300 DPI where possible.
- Use the builder to size every logo, badge, chest print, label, or decal exactly where you need it on the sheet.
- This sheet uses the adhesive and production speed shown above. There is nothing else to choose before you build.
- Review the final layout carefully. The builder is intended to produce a print-ready transfer for production.
Available Options
Print Type
DTF (Textile)
Film
Iron-On cool peel (household iron, cotton-first)
Adhesive powder
White (Standard)
Production Tiers
- Standard (3-5 business days)
- Same/Next Day (coming soon, aimed at November–December 2026, not available to order before then)
Production and Turnaround
Turnaround is the standard production time in the builder. Same/Next Day handling is coming soon, aimed at November–December 2026, and cannot be ordered before then.
Helpful Resources
3-5 business days processing
Estimated ready within standard 3–5 business days: 29 Oct - 2 Nov
Shipping: Standard from $12.95 · Express from $15.95 · Free pickup in Coorparoo. Full rates
Important for polyester: We strongly recommend against using Iron-On DTF transfers on polyester. Polyester is heat-sensitive and dye-prone, and it is very difficult to get a reliable fit and lasting result with a household iron or craft press. If you still want to try, test on a spare garment first — the choice is yours. For polyester, a proper heat press with our standard Hot Peel / Insta-Peel transfers (and careful testing) is the better path.
This is a labelled iron-on DTF cut sheet, available in 200 × 390 mm, 260 × 390 mm, 280 × 390 mm and 300 × 390 mm. A household iron is OK on this product only. It is not a gang sheet and is not the same as our standard heat-press-only sheets.
Quick settings (household iron): approx. 135–145°C, steam off, firm and even pressure on a firm, flat, heat-resistant surface (not a padded ironing board). Cover with baking paper and press ~10 seconds per section, overlapping. Cool 30–60 seconds before peeling, then a 10–15 second finishing press per section under baking paper. Wait at least 24 hours before the first wash. Full steps: iron-on fitting instructions.
Using a Cricut EasyPress? Same starting settings (approx. 135–145°C, firm even pressure, cool 30–60 seconds before peeling). Full steps: Cricut EasyPress fitting instructions.
For application, follow the packing slip / fitting guide: transfer fitting instructions. More help is available in our FAQ.
Bought this from us? You can review it here when you are logged in with the same email, or from the link we email a week after the order is completed.
Only logged in customers who have purchased this product may leave a review.
Related products
DTF Gang Sheets
DTF Specialty Transfers
DTF Custom T Shirt Transfers
DTF Specialty Transfers
DTF Specialty Transfers
Reviews
There are no reviews yet.